Transcend is very pleased to announce its 2.5-inch IDE Solid State Drive (SSD), which is compatible with most mainstream PC and notebook computers. The 2.5-inch IDE interface SSD has a tough outer metal case, enormous capacities, high reliability, low power consumption and anti-shock features that make it ideal to replace Hard Disk Drives. Transcend’s 2.5-inch IDE SSD series has a distinct advantage over standard 2.5” HDDs in that it is a solid-state memory with no moving parts, and therefore not susceptible to mechanical failure as a result of vibrations.
Transcend’s 2.5-inch IDE SSD is compact in size and its thickness is only 7.4mm, which makes it very easy to install in PCs and notebooks. In addition, the 2.5-inch IDE SSD has built-in ECC (Error Correction Code) functionality that ensures highly reliable data transfer and increases your systems energy efficiency.
Features
- RoHS compliant
- Fully IDE compatible
- Non-volatile Flash Memory for outstanding data retention
- Built-in ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable of data transfer
- Supports up to Ultra DMA Mode 6
- Lower Power Consumption
- Shock resistance
- Two-year Limited Warranty*
Specification
Size:
100.3 X 69.85 X 7.4 mm
Op. Voltage:
5.0V
Op. Temperature:
0°C(32°F) to 70°C(158°F)
Weight:
55g
Performance:
SLC -
Read up to 32MB/s, Write up to 27MB/s (2GB)
Read up to 86MB/s, Write up to 52MB/s (4GB)
Read up to 95MB/s, Write up to 85MB/s (8GB)
Read up to 90MB/s, Write up to 80MB/s (16GB)
Read up to 90MB/s, Write up to 80MB/s (32GB)
Read up to 90MB/s, Write up to 80MB/s (64GB)
MLC -
Read up to 80MB/s, Write up to 30MB/s (32GB, 64GB,128GB)
Shock Resistance:
1500G, 0.5ms
Vibration Resistance:
3.0G, 5 - 800Hz
MTBF:
1M hours
*Note:
For OS installations, SLC version is recommended